Sound system for Seat Leon 5F (without sound system) with DSP amplifier incl. spare wheel subwoofer

DSP sound system incl. subwoofer for your Seat Leon 5F

Your sound in your Seat Leon 5F is taken to the next level with our new DSP sound system including subwoofer. Installation is quick and easy thanks to our plug & play concept. You can enjoy the improved sound immediately, without any lengthy conversions.

Our set contains everything you need for an uncomplicated installation: the OPTION DSP6 power amplifier, the OPTION Drive 10 BR-P subwoofer and a special cable set.

ATTENTION: Only for vehicles supplied ex works without sound system / power amplifier. It is also important that a navigation system is installed in the vehicle ex works.

If you have installed the BEATS sound system, one of these solutions will fit.

Hidden power source - the DSP power amplifier

The DSP power amplifier is already preset but still offers flexibility for individual customisation. Its digital design enables hidden installation without heat problems. Your front system is controlled fully actively and the speakers are supplied with plenty of power. The subwoofer also gets the power it needs.

Bass that inspires - the OPTION Drive 10 BR-P subwoofer

The subwoofer built into the bass reflex housing delivers precise and powerful bass that takes your sound experience in the vehicle to a new level. It is also thanks to this type of housing that you can experience rich bass even though the subwoofer is hidden in the spare wheel well. Its 25 cm cone is ideal for any type of music.

Simple installation with plug & play

Thanks to the included cable set, cutting original cables and laying thick power cables is history. Everything you need is included in our set and explained in our YouTube video.

All-round carefree package

Support whenever you need it

If you need help, our customer service team will be happy to assist you. You can find our contact details and service times at the bottom of the page. Our YouTube video will also help you directly and guide you step by step through the installation process.

Scope of delivery

• OPTION DSP6 power amplifier
• OPTION Drive 10 BR-P subwoofer
• Plug & Play cable set
• Radio unlocking key
• Subwoofer cable (5 metres)
• Insulating tape
• Pull-through tape

Matching accessories

Find matching accessories in our shop, next to the item description or in the "Accessories" tab at the bottom of the page.

Technical details for sound enthusiasts

DSP power amplifier specifications

• Highly efficient 6-channel DSP amplifier
• Class GD technology
• Class GD
• 6-channel amplifier / 8-channel DSP
• 6 x 60 watts RMS (4 ohms)
• 4 x 60 watts RMS (4 ohms) + 1 x 120 watts RMS (4 or 2 ohms)
• Channels 5 and 6 are combined in mono mode
• Minimum impedance on all stereo channels: (3 Ohm)
• Minimum impedance in mono mode: 1.5 Ohm
• ADEP.3 diagnostic protection for problem-free connection to OEM radios
• Start/stop capable up to 5 sec. up to 6 volts
• High-level in (4 channels) with automatic on/off switch
• Frequency band: 20 Hz to 21k Hz
• Integrated 8-channel DSP processor with 358 kHz
• 2 channels line-out up to 3 Volt | 3.5mm jack
• 2 phase synchronous DC/DC converter
• A/D converter: BurrBrown
• D/A Converter: BurrBrown
• Operating voltage: 10.3 V - 17.5 V
• Power reduction to mid-power mode
• Minimised Dimensions for uncomplicated retrofitting
• 94 x 149 mm x 32 mm (118 x 149 mm with mounting bracket)
• 0.6 mA standby quiescent current
• Main connection: 20-pin Molex MiniFit Jr.
• Subwoofer connection: 4-pole Molex MiniFit Jr.
• Programming port for DSP-Eprom: RJ-45 modular jack
• Remote control connection: RJ-45 modular jack
• Power and Protect LED

Subwoofer specifications

• Power handling: 300 W RMS
• Impedance: 2 Ohm
• Frequency range: 35 - 100 Hz
• Efficiency: 87dB
• Dimensions: 575 mm x 150 mm
• Weight: 15.6kg

Enjoy the ultimate sound experience in your Seat Leon 5F with our DSP sound system including subwoofer. Easy installation, outstanding sound - you'll find everything you want here!