Sound system for Seat Leon 5F (without sound system) | DSP amplifier, speakers, subwoofer | V3 | OPTION

Seat Leon 5F sound system upgrade (DSP) incl. subwoofer and front speakers | V3 | Plug & Play | OPTION

The Seat Leon 5F sound system upgrade is the perfect solution to take the sound of your vehicle to a whole new level. This set includes a high-quality DSP power amplifier, a powerful subwoofer and high-quality front speakers, all in a plug & play configuration for incredibly easy installation.

ATTENTION: Only for vehicles supplied ex works without sound system / power amplifier. It is also important that a navigation system is installed in the vehicle ex works.

If you have installed the BEATS sound system, one of these solutions will fit.

Main features of the upgrade

Compact and powerful 6-channel power amplifier

The power amplifier included in the set is characterised by its compactness and performance. It amplifies the front system (fully active) and the subwoofer to maximise the sound experience. Thanks to its digital design, it is very thermally efficient and can be installed inconspicuously in the vehicle.

Optimised speakers for the front area

The speakers supplied are specially tuned to the system and are perfectly controlled by the DSP power amplifier. The result is a significantly improved sound volume and impressive dynamics.

Passive spare wheel woofer for deep basses

The included spare wheel woofer with its bass reflex enclosure provides a powerful and precise bass that noticeably enhances the sound experience in the vehicle.

Effective door insulation

The door insulation reduces background noise and improves the impulse behaviour of the bass/midrange speakers, resulting in a clearer and more pleasant sound experience.

Installation: Quick and easy

The upgrade is easy to install thanks to the plug & play principle. The installation is also explained in detail step by step in our YouTube video.

Support and instructions

Our YouTube video is available for support. If you have any problems, we will be happy to help - simply contact our customer service team.

Scope of delivery

• OPTION DSP6 power amplifier
• OPTION Drive 10 BR-P subwoofer
• Front speakers
• Plug & Play cable set
• Radio unlocking key
• Subwoofer cable (5 metres)
• Insulating tape
• Pull-through tape
• 2x aluminium butyl insulation mats
• 1x foam mat
• Remover tools

Accessories and complementary products

If the accessories are not already part of the item (see item image), we link helpful (installation) accessories to the right of the item description or at the bottom of the page in the "Accessories" tab of the same name.

Technical data of the sound system

Technical data DSP power amplifier

• Highly efficient 6-channel DSP amplifier
• Class GD
• 6-channel amplifier / 8-channel DSP
• 6 x 60 watts RMS (4 ohms)
• 4 x 60 watts RMS (4 ohms) + 1 x 120 watts RMS (4 or 2 ohms)
• Channels 5 and 6 are combined in mono mode
• Minimum impedance on all stereo channels: (3 Ohm)
• Minimum impedance in mono mode: 1.5 Ohm
• ADEP.3 diagnostic protection for problem-free connection to OEM radios
• Start/stop capable up to 5 sec. up to 6 volts
• High-level in (4 channels) with automatic on/off switch
• Frequency band: 20 Hz to 21k Hz
• Integrated 8-channel DSP processor with 358 kHz
• 2 channels line-out up to 3 Volt | 3.5mm jack
• 2 phase synchronous DC/DC converter
• A/D converter: BurrBrown
• D/A Converter: BurrBrown
• Operating voltage: 10.3 V - 17.5 V
• Power reduction to mid-power mode
• Minimised Dimensions for uncomplicated retrofitting
• 94 x 149 mm x 32 mm (118 x 149 mm with mounting bracket)
• 0.6 mA standby quiescent current
• Main connection: 20-pin Molex MiniFit Jr.
• Subwoofer connection: 4-pin Molex MiniFit Jr.
• Programming port for DSP-Eprom: RJ-45 modular jack
• Remote control connection: RJ-45 modular jack
• Power and Protect LED

Technical data subwoofer

• Power handling: 300 W RMS
• Impedance: 2 Ohm (DVC 4 Ohm + 4 Ohm)
• Frequency range: 35 - 100 Hz
• Efficiency: 87dB
• Dimensions: 575 mm x 150 mm
• Weight: 15.6kg

Technical data loudspeaker

• 20 cm diameter / 2-way compo system Plug & Play
• 28mm silk dome tweeter
• 100 Watt RMS power
• 4 Ohm Impedance
• 91 dB Efficiency