Sound system for Seat Leon 5F (with Beats, without LWL) DSP amplifier, speakers, subwoofer | V4 | OPTION
€1,249.00*
Prices incl. VAT plus shipping costs
Delivery time: 2-3 days ***
free shipping **
Seat Leon 5F with Beats sound system - without fibre optics | DSP sound system incl. front speakers & spare wheel subwoofer | V4 | OPTION
ATTENTION: This set is only suitable if your Beats power amplifier does not have a fibre optic cable. Only the black connection block must be present, nothing else.
If your power amplifier is connected to a fibre optic cable , you will need this set.

Why this set is ideal for you
Quick installation, maximum sound: With this kit, you get a complete upgrade for your Seat Leon 5F. Thanks to the plug & play system, the very compact 6-channel power amplifier can be installed in no time at all using the supplied cable set. This simplified integration means you can enjoy your new sound upgrade in no time at all. And best of all: our power amplifier works so efficiently that it hardly emits any heat and can therefore be installed invisibly in the vehicle.
Sound quality that impresses
This set comes with new speakers for the front, which are optimally amplified by our DSP power amplifier. This allows the full potential in terms of sound, bass and level to unfold. You'll be surprised how much more volume and dynamics can be extracted from the sound in your Seat!
Door insulation and subwoofer included
Of course, we have also thought about the "trappings". The door insulation reduces background noise and improves the impulse behaviour of the speakers. In addition, the Option Drive 10 BR-P passive subwoofer included in the set ensures a precise and powerful bass experience.
Simple installation
Installation is possible using the plug & play principle. Our YouTube video explains every step in detail so that you can easily carry out the installation yourself. Still have questions or problems with installation? No problem, our customer service is at your disposal.
Scope of delivery:
- OPTION DSP6 power amplifier
- OPTION Drive 10 BR-P spare wheel subwoofer incl. Plug & Play connector
- Plug & Play front speaker system
- Plug & Play cable set between car radio and vehicle (incl. power supply)
- 2x aluminium butyl damping mats
- 1x foam mat
- Rivets
- Remover tools
Accessories and technical details
Further helpful (installation) accessories can be found next to the article description or at the bottom of the page under the "Accessories" tab.
Technical data DSP power amplifier
- Highly efficient 6-channel DSP amplifier
- Class GD
- 6-channel amplifier / 8-channel DSP
- 6 x 60 watts RMS (4 ohms)
- 4 x 60 watts RMS (4 ohms) + 1 x 120 watts RMS (4 or 2 ohms)
- Channels 5 and 6 are combined in mono mode
- Minimum impedance on all stereo channels: (3 Ohm)
- Minimum impedance in mono mode: 1.5 Ohm
- ADEP.3 diagnostic protection for problem-free connection to OEM radios
- Start/stop capable up to 5 sec. up to 6 volts
- High-level in (4 channels) with automatic on/off switch
- Frequency band: 20 Hz to 21k Hz
- Integrated 8-channel DSP processor with 358 kHz
- 2 channels line-out up to 3 Volt | 3.5mm jack
- 2 phase synchronous DC/DC converter
- A/D converter: BurrBrown
- D/A Converter: BurrBrown
- Operating voltage: 10.3 V - 17.5 V
- Power reduction to mid-power mode
- Minimised Dimensions for uncomplicated retrofitting
- 94 x 149 mm x 32 mm (118 x 149 mm with mounting bracket)
- 0.6 mA standby quiescent current
- Main connection: 20-pin Molex MiniFit Jr.
- Subwoofer connection: 4-pin Molex MiniFit Jr.
- Programming port for DSP-Eprom: RJ-45 modular jack
- Remote control connection: RJ-45 modular jack
- Power and Protect LED
Technical data subwoofer
- Power handling: 300 W RMS
- Impedance: 2 Ohm (DVC 4 Ohm + 4 Ohm)
- Frequency range: 35 - 100 Hz
- Efficiency: 87dB
- Dimensions: 575 mm x 150 mm
- Weight: 15.6 kg
Technical data loudspeaker
- 20 cm diameter / 2-way compo system Plug & Play
- 28mm silk dome tweeter
- 70 Watt RMS power
- 3 Ohm impedance
- 91 dB Efficiency