Sound system for Mercedes V-Class W447 2020-2024 Standard 1st facelift | DSP power amplifier + subwoofer + front speakers | V2 | OPTION

Plug & Play DSP amplifier + subwoofer + front speakers for Mercedes V-Class W447 2020-2024 Standard 1st facelift | V2 I OPTION

This V2 set takes your Mercedes V-Class W447 (1st facelift, model year 2020-2024) to the next sound level.

It combines the compact OPTION DSP-6 amplifier with vehicle-specific DSP setup, a passive under-seat subwoofer and the high-quality front loudspeaker kit including insulation and installation accessories.

The result: an impressively powerful and detailed sound experience - with crisp bass, clear treble and more dynamics in all seats. Thanks to complete plug & play installation, the original cabling remains untouched and everything can be retrofitted at any time.

This set is ideal for the V-Class W447 (1st facelift) - model year 2020 to 2024 with standard sound system, i.e. without power amplifier or subwoofer under the seat and if the following factory radio of the first facelift is installed ex works:

For car radios with a Quadlock connection, as in the pre-facelift models without MBUX system, please select the pre-facelift model in the vehicle search.

Installation:

The installation is completely plug & play - no original cables are damaged. The enclosed T-cable set is connected directly to the factory radio.

• Remove the ventilation grille with the enclosed pull-out hook and loosen the Torx screws behind it.
• Pull out the radio and insert the T-cable set in between - all plugs remain undamaged.
• Securely fasten the DSP-6 power amplifier under the centre console using wide Velcro tape.
• Route the subwoofer cable to under the driver's seat, insert the subwoofer using an E14 socket spanner and 40 mm angle Torx and secure with metal brackets.
• Install the front loudspeakers: Replace the original speakers with the new 16.5 cm woofers, simply clip the new tweeters onto the original grilles and connect using Plug & Play.
• Attach insulation: 3x aluminium butyl for door panels, 1x foam mat for decoupling, 1 m bitumen tape for small parts - all included in the set.

With the enclosed remover tool and Torx kit, the door panelling can be removed without scratching or damage. Thanks to plug & play technology, the entire set is also suitable for leasing.

Installation video:

Support:

With the help of our YouTube videos, you can carry out the installation yourself in a relaxed manner.

If you have any problems during installation or with the product, you are welcome to contact our customer service team by email or phone. The contact details and times can be found at the bottom right of this homepage.

Scope of delivery:

• OPTION DSP-6 amplifier with vehicle-specific setup
• Underseat subwoofer for Mercedes Vito / V-Class W447 (OPTION | AIR-8 D4)
• 2x 16.5 cm woofers (Plug & Play)
• 2x 28 mm tweeter incl. crossover
• 3x aluminium butyl damping mat
• 1x foam mat
• 1m bitumen tape
• Foam sealing rings for speakers
• 1x Remover Tool
• 1x Torx Kit
• 1x wide Velcro tape for fastening
• 1x T-cable set for signal tap on the factory radio (051.060-0)
• 1x subwoofer cable (052.003-0)
• 1x Pull-out hook for ventilation grille
• 1x E14 socket spanner
• 1x 40mm angle torx
• 1x cable tie

Technical data

• DSP-6 power amplifier:
• 6-channel amplifier with DSP
• Power: 6 x 60 watts RMS
• Auto Sense - automatic switch-on function
• Pre-programmed for specific vehicles - no setup necessary
• Plug & Play - no cables are damaged
• Compact design - ideal for concealed installation

• Subwoofer:
• Chassis: OPTION | AIR-8 D4
• Diameter: 20 cm (8 inch)
• Power handling (RMS): 200 watts
• Impedance: 2 Ohm
• Installation depth: 7.6 cm
• Magnet: Ferrite
• Position: under driver's seat (depending on model, without additional battery)

• Front loudspeaker:
• System: 2-way component system
• Diameter woofer: 16.5 cm
• Tweeter: 28 mm fabric tweeter
• Power handling (RMS): 50 watts
• Impedance: 3 Ohm
• Installation: Plug & Play