Sound system for Audi Q4 e-tron (FZ) with Audi Sound System (ASS) | DSP power amplifier + front speakers + subwoofer | V1 | OPTION

Sound system for the Audi Q4 e-tron (Type FZ, model years 2021–2026) with Audi Sound System (ASS): DSP power amplifier, front speakers and subwoofer

What this set offers you

This V1 set is the ideal solution if you want to noticeably improve not just the bass but the entire front soundstage in your Audi Q4 e-tron fitted with the Audi Sound System (ASS). The front speakers deliver clearer vocals, cleaner treble and more precise reproduction. The subwoofer sounds fuller, more controlled and significantly more mature than the small original subwoofer. Added to this is the DSP power amplifier, which finely tunes the entire system to the vehicle and, with increased power, appropriate time alignment, precise equalisation and optimised filters, delivers significantly greater dynamics and control.

The installation remains pleasantly neat: the speakers, subwoofer and wiring harness are vehicle-specific, so nothing needs to be cut, adapted or modified. V1 is also the right choice if you want to continue using the standard rear speakers for the time being, whilst still taking a big step forward in sound quality.

Is this suitable for your vehicle?

• Suitable for the Audi Q4 e-tron (Type FZ)
• Model years 2021–2026
• For vehicles with the Audi Sound System (ASS) only
• The front speakers are replaced, the original subwoofer is replaced, and the standard rear speakers remain in the vehicle with V1

Installation

• Open the floor panel, release the door trim and remove the original subwoofer
• Connect the 302.102-ASS adapter and insert the subwoofer into the designated recess
• Loosen the side trim and glove compartment to expose the radio unit
• Connect the 051.024-MOLEX Plug & Play wiring harness and connect the DSP-6.2 amplifier
• Use bitumen tape for the recessed screw on the glove compartment
• Remove the front door trim and the tweeter in the A-pillar area
• Apply aluminium butyl and sound-deadening foam to the designated areas
• Fit the new front speakers precisely and connect the Plug & Play unit
• Detailed instructions in the installation video

Installation video

Support:

With the help of our YouTube videos, you can carry out the installation yourself, at your own pace.

If you encounter any problems during installation or with the product, please feel free to contact our customer service team by email or phone.

Even more sound for your Audi Q4 e-tron

If you’d also like to replace the rear speakers at the same time, the V2 upgrade is the right choice. View all suitable solutions for the Audi Q4 e-tron with Audi Sound System (ASS)

Contents of the package

• DSP / Power Amplifier
• 1 x OPTION DSP-6.2
• 1 x 051.024-MOLEX Plug & Play wiring harness
• 1 x 1 metre bitumen tape
• Subwoofer
• 1 x OPTION ROCK-10
• 1 x 302.102-ASS Plug & Play adapter
• Molex connection cable with open ends (not required here)
• Molex jumper (not required here)
• Front speakers
• 1 x OPTION V-165
• Insulation
• 2 x aluminium butyl sound-deadening mats
• 1 x sound-deadening foam mat
• Installation accessories
• 2 x 10 cm fabric-backed adhesive tape
• 1 x rivet pliers
• 1 x Torx set
• 1 x Remover tool (single)

Technical specifications

• DSP-6.2 Amplifier
• 6-channel amplifier with 8-channel DSP processor
• Includes vehicle-specific setup
• Highly efficient 6-channel DSP amplifier
• Class GD amplifier technology
• 6-channel amplifier / 8-channel DSP
• 6 x 60 watts RMS at 4 ohms
• 4 x 60 watts RMS at 4 ohms + 1 x 120 watts RMS at 4 or 2 ohms in subwoofer mode
• Channels 5 and 6 are combined in mono mode
• Minimum impedance on all stereo channels: 3 ohms
• Minimum impedance in mono mode: 1.5 ohms
• ADEP.3 diagnostic protection for trouble-free connection to OEM radios
• Start/Stop compatible for up to 5 seconds at 6 volts
• High-level input with 4 channels and automatic on/off switching
• Frequency range: 20 Hz to 21 kHz
• Integrated 8-channel DSP processor with 358 kHz
• 2 line-out channels up to 3 volts via 3.5 mm jack
• 2-phase synchronous DC/DC converter
• A/D converter: BurrBrown
• D/A converter: BurrBrown
• Operating voltage: 10.3 V – 17.5 V
• Power reduction to mid-power mode
• Compact dimensions for straightforward retrofitting
• Dimensions: 94 x 149 x 32 mm
• Dimensions with mounting bracket: 118 x 149 x 32 mm
• 0.6 mA standby quiescent current
• Main connector: 20-pin Molex MiniFit Jr.
• Subwoofer connector: 4-pin Molex MiniFit Jr.
• Programming port for DSP EPROM: USB-C
• Remote control connector: SCP
• Power and Protect LEDs
• Front speakers
• 16.5 cm diameter / 2-way component system
• Plug & Play
• 70 watts RMS power
• 3 ohms impedance
• 91 dB sensitivity
• 25 mm silk dome tweeter
• Subwoofer
• Size: 20 cm subwoofer
• Type: Passive
• Impedance: 4 ohms + 4 ohms (dual voice coil)
• Power handling (RMS): 200 watts
• Compact, robust enclosure
• Bass-reflex design for deep, powerful sound
• Lightweight, space-saving and unobtrusive
• Soundproofing
• 2 x aluminium butyl damping mats, each 75 x 50 cm / 2 mm
• 1 x self-adhesive sound-deadening foam mat, 500 x 700 x 10 mm