Helix M ONE
€299.00*
Prices incl. VAT plus shipping costs
Delivery time: 2-3 days ***
free shipping **
Shipping only possible to Germany, Austria and France
Helix M ONE
1-channel mono digital amplifier
- Particularly compact Class D amplifier with high output power of 600 watts RMS at 1 ohm - ideally suited for combination with all 2 x 2 ohm subwoofers in parallel operation
- Start-stop capability down to 6V supply voltage
- Intelligent high-level input with ADEP circuit (Advanced Diagnostics Error Protection) and automatic switch-on
- Integrated, active crossover with low-pass, bass boost, subsonic and phase
- Extremely load-stable power amplifier with high-current power transistors and 1 ohm stability
- Wired remote control for volume control
- SMD technology (Surface Mounted Device) combines minimum space requirement with maximum reliability
- Exclusive, very compact design with illuminated HELIX logo and low heat generation thanks to very high efficiency
Special features:
Intelligent high-level input
Modern, factory-installed car radios are becoming increasingly intelligent with regard to the diagnosis of the connected speakers. If an amplifier is connected to the radio instead, this usually results in error messages or even the cancellation of individual functions (e.g. faders). The new ADEP circuit (Advanced Diagnostics Error Protection) prevents all these problems without unnecessarily overloading the radio's speaker outputs at high levels.
Start-stop capability
The power supply unit in the HELIX M ONE amplifier ensures the internal power supply even in the event of short-term dips down to 6 volts. This ensures that the HELIX M ONE remains fully functional even when the engine is started.
| Power RMS / Max. | |
| - @ 4 Ohm | 1 x 240 / 480 Watt |
| - @ 2 Ohm | 1 x 410 / 820 Watt |
| - @ 1 Ohm | 1 x 600 / 1,200 watts |
| - bridged at 4 Ohm | - |
| - bridged to 2 Ohm | - |
| Amplifier technology | Class D |
| Inputs | 2 x RCA 2 x high level speaker input 1 x Remote In 1 x remote control input |
| Input sensitivity | RCA 0.5 - 6 volts High level 1.1 - 13 volts |
| Cinch input impedance | 20 kOhm |
| Input impedance high level | 13 Ohm |
| Outputs | 1 x loudspeaker output |
| Output voltage RCA | - |
| Signal converter for the digital input | - |
| Frequency range | 10 Hz - 250 Hz |
| Bass boost | 0 - 12 dB / 25 - 75 Hz |
| High pass | - |
| Low pass | 50 Hz - 250 Hz adjustable |
| Bandpass | 10 Hz - 250 Hz adjustable |
| Subsonic | 10 Hz - 50 Hz adjustable |
| Phase | 0 - 180° adjustable |
| Edge steepness high / low pass | - |
| Subsonic / low-pass slope | 12 / 24 dB/oct. |
| Signal-to-noise ratio Digital input | - |
| Signal-to-noise ratio analogue input | 95 dB (A-weighted) |
| Distortion factor (THD) | 0,20 % |
| Attenuation factor | 100 |
| Operating voltage | 10.5 - 16 volts (max. 5 sec. down to 6 volts) |
| No-load current consumption | 650 mA |
| Fuse | 2 x 35 A maxi plug-in fuse (FK3) |
| Additional features | Active, adjustable crossover, bass boost, phase shift, start-stop capability, high-level input with automatic switch-on and Advanced Diagnostics Error Protection (ADEP), bass level cable remote control |
| Dimensions (H x W x D) | 50 x 230 x 154 mm |
Contents: 5 Meter (€2.98* / 1 Meter)
Contents: 5.5 Meter (€7.09* / 1 Meter)
Zubehör
Delivery time: 2-3 days ***
free shipping **
Shipping only possible to Germany, Austria and France
Contents: 5 Meter (€2.98* / 1 Meter)
Delivery time: 2-3 days ***
free shipping **
Shipping only possible to Germany, Austria and France
MONE
Delivery time: 2-3 days ***
free shipping **
Shipping only possible to Germany, Austria and France
Contents: 5.5 Meter (€7.09* / 1 Meter)