€599.00*
Prices incl. VAT plus shipping costs
ready for dispatch immediately, delivery time 1-2 days ***
free shipping **
VW ID.3 sound upgrade | Plug & Play DSP power amplifier for optional subwoofer
DSP6 | Ultra compact Class HD DSP amplifier perfectly matched to the VW ID.3
If you want to improve the sound in your ID.3 in a simple but noticeable way, then this set is just right for you. The incredibly compact power amplifier can be easily and quickly integrated into your vehicle via plug & play with the included cable set and you can enjoy your sound upgrade in no time at all.
The 6-channel power amplifier powers your front system, the rear speaker system and one of our recommended subwoofers with sufficient power so that you can now utilise the full potential in terms of sound, bass and level. Due to the digital design, the power amplifier emits hardly any heat and can therefore be installed invisibly in the radio slot. The appropriate sound setup for the VW ID.3 is already installed on the power amplifier and only Poti1 and Poti2 need to be adjusted to your own taste.
Estimated installation time: approx. 60 minutes (with subwoofer)
Sound expectation: Higher volume with clear sound / significantly more precise and powerful bass / brilliant treble / excellent voice position in the centre of the dashboard
We recommend the following subwoofer for the ID3 (other 2 Ohm woofers are also possible):
Or a subwoofer of your choice, but you should make sure that the woofer has a total impedance of 2 Ohm mono. Under no circumstances 1 Ohm! With a 4 Ohm subwoofer, operation with the DSP-6 power amplifier is possible at any time, but the maximum power output is then only 60 watts RMS instead of 120 watts RMS.
Two channels are used for the front system, while two further channels are available for the rear speakers and a passive subwoofer. Two further channels are then available via the Line Out connection to connect additional active subwoofers or power amplifiers and control them via the DSP.
Technical data DSP6:
- Highly efficient 6-channel DSP amplifier
- Class GD
- 6-channel amplifier / 8-channel DSP
- 6 x 60 watts RMS (4 ohms)
- 4 x 60 watts RMS (4 ohms) + 1 x 120 watts RMS (2 ohms)
- Channels 5 and 6 are combined in mono mode
- Minimum impedance on all stereo channels: (3 Ohm)
- Minimum impedance in mono mode: 1.5 Ohm
- ADEP.3 diagnostic protection for problem-free connection to OEM radios
- Start/stop capable up to 5 sec. up to 6 volts
- High-level in (4 channels) with automatic on/off switch
- Frequency band: 20 Hz to 21k Hz
- Integrated 8-channel DSP processor with 358 kHz
- 2 channels line-out up to 3 Volt | 3.5mm jack
- 2 phase synchronous DC/DC converter
- A/D converter: BurrBrown
- D/A Converter: BurrBrown
- Operating voltage: 10.3 V - 17.5 V
- Power reduction to mid-power mode
- Minimised Dimensions for uncomplicated retrofitting
- 94 x 149 mm x 32 mm (118 x 149 mm with mounting bracket)
- 0.6 mA standby quiescent current
- Main connection: 20-pin Molex MiniFit Jr.
- Subwoofer connection: 4-pole Molex MiniFit Jr.
- Programming port for DSP-Eprom: RJ-45 modular jack
- Remote control connection: RJ-45 modular jack
- Power and Protect LED
Here you can find the video instructions for the VW ID.3 sound upgrade:
Scope of delivery:
- 1x OPTION DSP-6 power amplifier (with pre-recorded sound file)
- 1x PP-Quadlock-DSP6 cable set for plug & play installation incl. power supply
- 1x PP-BM-200-SUB subwoofer connection cable (OPTION ROCK-4 (ID.3))
5 Ratings
13 June 2026 10:56 from Andreas
Hält was es verspricht
Habe das Modul in Kombination mit dem Subwoofer für das Unterflurfach im Kofferraum seit Februar verbaut und im Einsatz. Einbau mit zwei Personen in 1 h ohne Schwierigkeiten und ohne Vorerfahrung erfolgt. (Einbauvideo sehr hilfreich...) Sound echt klasse mit den Werkslautsprechern. Auch ohne weitere Dämmung kein störendes Vibrieren oder Klappern bei der gewählten Einstellung. Vorgegebenes Soundprofil für mein Hörvermögen gut. Die im Einbauvideo angesprochenen Probleme mit Spotify konnte ich nicht feststellen. Alles läuft rund.
10 March 2026 19:47 from Rene
Gut gemacht!!
Super einfache Montage und gut erklärt Bein einem Downfiere Sub stimmt die Laufzeit nicht ganz . Trotzdem gut
10 March 2026 12:48 from Rene
Sehr einfach zu machen
Ist eine sauber und einfach Lösung, In Verbindung mit einem downfire Subwoofer Stimmen die Laufzeiten nicht 100 prozentig . Aber sonst super Sound
10 September 2025 09:21 from Thomas
Ganz schön laut.
Hallo, so ein kleiner Verstärker und zusammen mit so viel Leistung. Es ist verdammt gut. und total einfach zu installieren, es hat mich 20 Minuten gekostet
4 April 2025 09:42 from Rene
Endlich guter Sound
Heute endlich schönes Wetter und gleich ausgenutzt um den ID ein wenig lauter zu machen. Der Einbau hat sehr gut funktioniert, es passt und sitzt alles sehr gut. Ich habe noch zusätzlich die Fenster ausgebaut, geht Recht einfach, um die Bitumenfolie wirklich auf der ganzen Türe anbringen zu können. Soviel Platz hatte ich bei keinem Auto davor, geht fast schon zu einfach ?? Die A-Säule war ein wenig schwer, aber da muss man sich einfach drüber trauen und einmal kräftig anziehen. Für den Woofer musste ich noch die Verkleidung bei der Mulde ausbauen, sonst hätte ich den Woofer nicht rein bekommen. Endlich hat der ID Bass, nicht zu aufdringlich, aber gut zu hören. Ein Dosendachdance ist zwar nicht möglich, aber aus dem Alter bin ich auch schon draußen ?? wobei, geil wars damals schon. 50PS Diesel 2er Golf, die Anlage war damals mehr wert als das Auto selbst, jetzt bespielt sie den Garten in einer selbstgebastelten Kiste und 12V Netzgerät und das nach 26 Jahren ???? Und das aller wichtigste,eine Frau ist Glücklich und somit ist die Welt perfekt. ??
