€189.00*
Prices incl. VAT plus shipping costs
ready for dispatch immediately, delivery time 1-2 days ***
free shipping **
Retrofitting DAB+ to the original factory radio (via USB connection)
Dension DAB+U Set Interface incl. suitable DAB+ windscreen antenna with external remote connection
With the DAB+U you can retrofit digital radio reception to your original factory radio. All you need is the factory radio, which also has a USB connection. The DAB+U is connected via this USB port and is thus automatically supplied with power (an extra power connection is not necessary).
Now you have to retrofit a DAB+ aerial in your vehicle (either the enclosed, suitable adhesive windscreen aerial, a roof aerial or a splitter which filters out a DAB+-compatible signal from the FM aerial).
The DAB+ stations are displayed on the factory radio as virtual MP3 files, which ensures simple operation and great compatibility. The buffer size (station switching time) of each factory radio is different and is automatically adopted by the DAB+U. In most cases, this results in station switching times of approx. 4-10 seconds (in rare cases, unfortunately, even over 60 seconds).
Please only use the antenna with external remote line included in the set as an adhesive disc antenna or if you want to use a different antenna then you need this phantom feed adapter!
Please note:
- Windscreen antenna not suitable for vaporised or thermo-glazed windows and vehicles with windscreen heating
- Radio stations that begin with a dot (.) in their station name cannot be played at the moment (probably possible in the future through updates)
ATTENTION:
1. not all factory radios can be adapted with this module and digital radio integrated. For this reason, we have summarised a compatibility table (see below) showing which car radios can be retrofitted with the Dension DAB+U.
2. to ensure that the DAB+U is optimally coordinated with the factory radio (recognisability as a USB stick and station switching times), it is necessary to modify the DAB+U with the correct file
3. you can find the file for the DAB+U update here under this link "File-Download" -> Connect the USB+U to the PC via USB and open it accordingly. Place the desired file in the "Settings" folder and the DAB+U is optimally programmed for your car radio.
4. which file you need for your car radio and which station switching times you should expect can be found here in the compatibility table below
Supplied with DAB+ windscreen antenna
- Connection to standard USB port
- Automatic Buffer Size Assessment (ABSA)
- Power supply via USB
- DAB, DAB+ and DMB-R standards are supported
- Amplified and non-amplified antennas are supported (via separate remote and not via phantom power)
- Easy 'browsing'
- Upgradeable firmware via USB
- SMB connector on interface port
- 12 volt output for active antenna (not to be confused with phantom power)
Here you will find the latest updates and config files for vehicles that are not on the list:
https://www.dension-deutschland.de/dab/dab-u-%C3%BC-usb/dab-u-news-tipps/
Detailed compatibility list: Dension compatibility
ZIP file with all file types for downloading to the DAB+U
Customer feedback on various vehicles and installation situations - very helpful : https://www.dension.de/dab/dabu-news-tipps
SCOPE OF DELIVERY: Hardware , USB cable (plug-plug) TYPE-A, connection cable for active antennas (2-pin micro plug), DAB+ windscreen antenna and installation accessories
1 - 10 from 46 Ratings
28 April 2026 11:01 from David
BMW X3 F25 (Baujahr 2012, CIC mit 6,5" Display)
Sehr zufrieden! Das Dension DAB+U funktioniert in meinem BMW X3 F25 (Baujahr 2012, CIC mit 6,5" Display, Konfigurationsdatei dbu_K62.cfg) einwandfrei. Die Montage war wirklich kinderleicht und schnell erledigt. Der Empfang ist top – selbst auf der Autobahn stabil und ohne Aussetzer. Die Umschalt-/Bufferzeit liegt bei ca. 8–10 Sekunden, was absolut im Rahmen ist. Insgesamt eine klare Empfehlung für alle, die DAB+ unkompliziert nachrüsten möchten. Gerne wieder!
23 February 2025 10:20 from Uwe
Ford Kuga DM2 ST-Line Bj.2019
Super Empfang an originaler Antenne in der Heckscheibe.Ich habe den AM-FM Verstärker in der Heckklappe ausgetauscht gegen einen Verstärker AM-FM-DAB+.Gebraucht für 5 Eur. in der Bucht.Dann ein Y-Kabel dran und die Antennen angeschlossen.Prima Sache.
26 November 2024 09:25 from Andreas
Opel Mokka X (BJ 2018)
Navi Intellilink 900 von Opel - hier passte die Firmware DBU3 P204.
26 November 2024 09:23 from Christian S
VW T6 mit Composition Audio / Global Entry 2018
Die File K54 brachte bei mir den erwünschten Erfolg.
28 July 2024 10:38 from Jörg
Einbau und Empfang einfach Klasse
Habe mir ein Set bestellt und gleichzeitig ein Sub mit anzuschliesen. Mit dem mir angebotenen Kabel war das anschließend sehr einfach. Habe nicht all zu lange dafür gebraucht. Lediglich die umschalt Zeit ist etwas hoch aber stört mich nicht da ich nicht so viel wechsele und meistens eine DAB Sender höre.Wer kein neues Radio verbauen und kaufen möchte ist das eine gute Alternative.Würde ich so weiter empfehlen.
14 May 2024 13:56 from Wilfried Nücker
DAB+U - Kuga DM2
Nach einigen anderen DAB+ Varianten habe ich nun Dension DAB+U in meinem Kuga ST-Line mit Vollausstattung verbaut. Da auch eine beheizte und bedampfte Frontscheibe verbaut ist, war die Montage der Scheibenantenne dort schon einmal ausgeschlossen und sieht auch bescheiden aus. Nachdem ich mich für die hintere linke Seitenscheibe (schwarz getönt, man sieht die Antenne nicht) entschieden hatte, habe ich die Scheibenantenne zunächst provisorisch ohne Karosserieanschluss verbaut. Der Empfang war dann nicht so toll. Nun habe ich die Antenne nach Vorgabe installiert. Die Kabel unter der linken Verkleidung bis zum Fahrersitz verlegt. Das Densiongerät unter dem Vordersitz befestigt und das USB-Kabel am USB-Anschluss in der Mittelkonsole angeschlossen. Man sieht nichts und der Empfang ist sogar gut bis sehr gut. Kleine Aussetzer sind manchmal vorhanden. Aber für die Preis-Leistung des Gerätes akzeptabel. Ich kann Dension DAB+U zur Nachrüstung wärmstens empfehlen. Nein, ich habe keine Provision für diese Bewertung erhalten.
2 April 2024 21:44 from Marc
Einbau Renault Captur 120EDC
Hallo Habe das Gerät in einen Renault Captur Jg. 2015 eingebaut. Radio des Fahrzeuges Typ LG Update mit File K43. Funktioniert einwandfrei. Sehr empfehlenswert und einiges günstiger als in der Schweiz
23 August 2023 22:44 from Klaus Pertgen
Dension DAB+U inkl. Scheibenantenne
Habe einen Ford EcoSport Automatik 92kw/125 PS ccm998 BJ 2019 Sync 3.4 original Ford Radio ohne DAB+. Jetzt habe ich auch endlich DAB+ funktioniert. Einbau plag & Play, Empfang sehr gut. Habe den File K66 Sync 3.3 genommen Buffer Zeit zwischen 4-7 Sekunden damit kann ich leben. jetzt kann der EcoSport auch in der Liste aufgenommen werden. Er zeigt ca. über 90 Sender an. Hatte mir erst ein Angebot eingeholt der auf Ford Autos spezialisiert ist der wollte fast 1000 € haben, so geht es doch auch viel Geld gespart.
7 August 2023 15:27 from Jürgen S.
Kodiaq Baujahr 2017 mit einem Amundsen Radio Navigation
Kodiaq Baujahr 2017 mit einem Amundsen Radio Navigation Habe mit dem Files K43 versucht. Hat aber nicht funktioniert. Jetzt habe ich gedacht ich versuche es mit dem Files K54. Jetzt funktioniert es einwandfrei.
24 April 2023 07:29 from Cornelius K.
Top Empfang im BMW F11 mit DBU3212
Die Antenne habe ich auf der rechten Seite an der C Säule verklebt mit 80% iger Tönungsfolie. Es wurden 90 Sender gefunden die zu etwa 90% Störungsfrei wiedergegeben werden. Die anderen 10% kommen vor in engen Häuserschluchten, Tälern und im Bereich von Hochspannungsleitungen und Handymasten. Da ist hin und wieder die Musik komplett weg. Das habe ich aber auch bei dem original BMW DAB Receiver beobachtet. In Dresden zum Beispiel konnte ich sogar durch einen 1000 meter langen Tunnel fahren ohne das die Musik weg war. Die Kabel habe ich entlang der C Säule bis runter zum Schweller verlegt. Sie gehen dann vor der Rücksitzbank unterm Teppich durch den Mitteltunnel bis zur Mittelkonsole.